Shopping for replacement parts for automatic pool cleaners usually comes down to two questions: does the part actually fit your specific model, and will it last more than a season or two? My top pick overall is the Polaris Suction Cleaner Tune-Up Kit (R0997900), because it bundles the wearable components most owners end up replacing individually, making it the smartest single purchase for restoring performance. Two other standouts: the Hayward Blue Hump Front Tire 2-Pack, which fixes the most common failure point on Hayward suction cleaners at a fraction of OEM-service pricing, and the Ulticor Ultra-Fine Filter Basket for Dolphin robots, the pick to beat if debris fines keep clouding your water. The main tradeoff in this category is OEM-verified fit versus cheaper multi-pack aftermarket parts — genuine kits cost more but remove guesswork, while third-party bundles save money but vary in material quality. Read on for the full breakdown, ranked by fit accuracy, durability, and overall value.
Get furniture and decor delivered free — and shop member deals
- Fast, free delivery on millions of items
- Access to Prime Big Deal Days deals on October 6–7
- Prime Video, Amazon Music and more included
Complete the kit
Key Takeaways
- Bundled tune-up kits like the Polaris R0997900 delivered the best value per repair because they address all wearable parts at once rather than one failure at a time.
- Tires and tracks were the single most-replaced part across suction cleaners — buying in multi-packs (the Blue Hump 2-Pack, Funmit 3-Pack) consistently beat single-unit pricing without quality loss.
- Aftermarket diaphragms and seals from ATIE matched OEM dimensions for Zodiac G3/G4 cleaners, making them a smart save, while robot-specific fine filters like Ulticor‘s basket justified their premium for pollen and silt-heavy pools.
- Cheap scrubbers and tail sweep replacements showed the widest quality spread; the 12-pack Polaris tail scrubbers won on volume, but buyers should verify hole sizing before ordering generic versions.
- Fit specificity was the deciding factor throughout — several parts fit only two or three cleaner generations, so checking your model number mattered more than brand reputation or price.
| 896584000-143 Blue Hump Front Tire Replacement for Hayward Pool Cleaner (2 Pack) |  | Best Value Wear Part | Part Number: 896584000-143 | Quantity: 2 tires | Material: Heavy-duty rubber | VIEW ON AMAZON | See Our Full Breakdown |
| Polaris Suction Cleaner Tune-Up Kit, R0997900 |  | Best Full Tune-Up Kit | Compatible Models: Polaris Atlas, Atlas XT, MAXX | Included Components: 2 drive shaft assemblies, engine assembly, direction control devices (V2, sides A and B), 2 tracks (V2), gear housing covers | Part Type: Genuine Polaris tune-up kit | VIEW ON AMAZON | See Our Full Breakdown |
| Polaris Vac-Sweep Head Float PVA20 (Fits 180, 280, 360, 380 Pool Cleaners) |  | Best Single Symptom Fix | Brand: Polaris | Part Number: PVA20 | Model Compatibility: Polaris 180, 280, 360, 380 | VIEW ON AMAZON | See Our Full Breakdown |
| Pentair Rebel Pool Cleaner Replacement Head (Head Only), 360486 |  | Best Premium Head Upgrade | Brand: Pentair | Part Number: 360486 | Product Type: Replacement cleaner head only | VIEW ON AMAZON | See Our Full Breakdown |
| The Pool Cleaner 2-Wheel Head Replacement Assembly for Hayward PBS20JSTHBX |  | Best Budget Head Swap | Part Number Replaced: PBS20JSTHBX | Cleaner Type: Suction-side automatic pool cleaner | Wheel Configuration: 2-wheel | VIEW ON AMAZON | See Our Full Breakdown |
| PGFUN 2-Pack All-Purpose Filter Bags for Polaris 360 and 380 Pool Cleaners |  | Best Two-Bag Value for Pressure-Side Debris | Quantity: 2 bags | Material: Nylon mesh | Compatibility: Polaris 360 and 380 | VIEW ON AMAZON | See Our Full Breakdown |
| ATIE Finned Seal Disc Skirt Replacement for Zodiac Baracuda G2, G3, G4 Pool Cleaners |  | Best for Suction-Side Cleaner Restoration | Compatible Models: Zodiac Baracuda G2, G3, G4 | Replaces Part Numbers: W70464, W70329, W46666, W83277, W47521, W49655, W49610, W70032 | Color: Blue | VIEW ON AMAZON | See Our Full Breakdown |
| Ulticor Ultra-Fine Filter Basket for Dolphin Robotic Pool Cleaners |  | Best Fine-Debris Filtration Upgrade | Compatibility: Dolphin S50, S100, Active 10/15, Echo, T15, T25, Proteus DX3, Saturn, Cayman, Escape, Nautilus CC, and more | Not Compatible With: Nautilus CC Pro, Nautilus CC Supreme | Filtration Type: Ultra-fine microfiltration | VIEW ON AMAZON | See Our Full Breakdown |
| R0714400 Cyclonic Scrubbing Brush Replacement (4-Pack) for Zodiac MX6 Elite, MX8 Elite and Polaris MAXX, Atlas, Atlas XT, Lynx Pool Cleaners |  | Best Multi-Pack for Scrubbing Performance | Quantity: 4 brushes | Part Number: R0714400 | Compatible Models: Zodiac MX6 Elite, MX8 Elite; Polaris MAXX, Atlas, Atlas XT, Lynx | VIEW ON AMAZON | See Our Full Breakdown |
| Nylon Mesh Pool Cleaner Bag for Polaris 280 and 480 |  | Best Match for Older Polaris 280 and 480 Owners | Compatible Models: Polaris 280 and 480 | Bag Types: K13, K16 | Material: Nylon mesh | VIEW ON AMAZON | See Our Full Breakdown |
| ATIE Long Life Diaphragm W69698 with Retaining Ring W81600 Replacement for Zodiac G3, G3 PRO, and G4 Pool Cleaners (2 Pack) |  | Best for Zodiac Model Coverage | Diaphragm model: W69698 | Retaining ring model: W81600 | Quantity: 2 diaphragms | VIEW ON AMAZON | See Our Full Breakdown |
| Funmit C10 Pool Cleaner Tire Replacements, 3-Pack |  | Best for Polaris Tire Refreshes | Quantity: 3 tires | Replacement part numbers: C10, C-10 (G4) | Compatible models: Polaris 180, 280, 360, 380; Vac-Sweep 280, 360, 380; 280 TankTrax; TR28P; 280 Black Max; 360 Black Max; TR36P; 380 Black Max; TR35P; 3900 Sport | VIEW ON AMAZON | See Our Full Breakdown |
| ATIE Pool Cleaner Hose Swivel D20 and Hose Nut D15 Combo Kit for Polaris 280, 380, and 180 (2 Pack) |  | Best for Polaris Feed-Hose Connections | Compatible models: Polaris 180, 280, and 380 | Excluded model: Polaris 360 | Package contents: 2 D20 hose swivels and 4 D15 hose nuts | VIEW ON AMAZON | See Our Full Breakdown |
| 12 Pack Sweep Hose Tail Scrubbers for Polaris Pool Cleaners |  | Best Bulk Supply for Sweep-Hose Scrubbers | Material: Polyurethane foam | Quantity: 12 scrubbers | Compatible models: Polaris 180, 280, 360, 380, 480, and 3900 Sport | VIEW ON AMAZON | See Our Full Breakdown |
| GW9012 Pool Cleaner Swivel Kit Assembly |  | Best for Select GW Cleaner Swivel Repairs | Part number: GW9012 | Package contents: 1 swivel assembly | Compatible models: 9000 and GW8000 Above Ground Pool Cleaner; GW9500 In-Ground Pool Cleaner | VIEW ON AMAZON | See Our Full Breakdown |
| replacement parts for automatic pool cleaner | Material | Compatible Models |
|---|---|---|
| 896584000-143 Blue Hump Front | Heavy-duty rubber | — |
| Polaris Suction Cleaner Tune-U | — | Polaris Atlas, Atlas XT, MAXX |
| Polaris Vac-Sweep Head Float P | Plastic | — |
| Pentair Rebel Pool Cleaner Rep | — | — |
| The Pool Cleaner 2-Wheel Head | Chemical-resistant, UV-stabilized plastic | — |
| PGFUN 2-Pack All-Purpose Filte | Nylon mesh | — |
| ATIE Finned Seal Disc Skirt Re | — | Zodiac Baracuda G2, G3, G4 |
| Ulticor Ultra-Fine Filter Bask | — | — |
| R0714400 Cyclonic Scrubbing Br | Premium plastic and rubber | Zodiac MX6 Elite, MX8 Elite; Polaris MAXX, Atlas, Atlas XT, Lynx |
| Nylon Mesh Pool Cleaner Bag fo | Nylon mesh | Polaris 280 and 480 |
| ATIE Long Life Diaphragm W6969 | — | Zodiac G3, G3 PRO, G4, Alpha 2, Alpha 3, and Zoom |
| Funmit C10 Pool Cleaner Tire R | Heavy-duty rubber | Polaris 180, 280, 360, 380; Vac-Sweep 280, 360, 380; 280 TankTrax; TR28P; 280 Black Max; 360 Black Max; TR36P; 380 Black Max; TR35P; 3900 Sport |
| ATIE Pool Cleaner Hose Swivel | Plastic | Polaris 180, 280, and 380 |
| 12 Pack Sweep Hose Tail Scrubb | Polyurethane foam | Polaris 180, 280, 360, 380, 480, and 3900 Sport |
| GW9012 Pool Cleaner Swivel Kit | Plastic | 9000 and GW8000 Above Ground Pool Cleaner; GW9500 In-Ground Pool Cleaner |
More Details on Our Top Picks
896584000-143 Blue Hump Front Tire Replacement for Hayward Pool Cleaner (2 Pack)
Front tires are the first thing to wear out on a Poolvergnuegen, and this 2-pack addresses that at a fraction of what a single OEM tire costs. The heavy-duty rubber and the hump profile solve a specific failure mode: cleaners hanging up on high main drains. Installation is a genuine five-minute, no-tools job, which makes it one of the easiest repairs in this roundup. Compared with the Funmit C10 tire 3-pack, this option covers fewer tires but targets a different cleaner family entirely, so buyers should match their model before choosing. The tradeoff is that it is a third-party part rather than original Hayward, so fit tolerance may vary slightly, and it only serves the front position on 2X and 4X models.
Pros:- Heavy-duty rubber construction at lower cost than OEM tires
- Tool-free installation in under five minutes
- Hump design specifically prevents hanging on high main drains
- Two tires included so you can replace both sides at once
Cons:- Third-party part, not original Hayward OEM
- Fits only the front tire position on 2X and 4X models
Best for: Hayward Poolvergnuegen 2X or 4X owners whose cleaner keeps stalling on a high main drain
Not ideal for: Owners of other cleaner brands or those needing rear tires — this part fits only the front position on two specific models
- Part Number:896584000-143
- Quantity:2 tires
- Material:Heavy-duty rubber
- Color:Blue
- Outer Diameter:7.7 inches
- Inner Diameter:6.2 inches
- Compatibility:Hayward Poolvergnuegen 2X and 4X
- Installation:Manual, tool-free
Our verdict“A smart, inexpensive fix for Poolvergnuegen owners facing tire wear or drain hang-ups, as long as the model match is confirmed.”
Polaris Suction Cleaner Tune-Up Kit, R0997900
Most replacement parts in this roundup handle a single failure point, but this kit takes a broader approach by bundling every major wear component for Polaris Atlas, Atlas XT, and MAXX suction cleaners: drive shafts, the engine assembly, direction controls, tracks, and gear housing covers. That matters because a cleaner that loses drive usually has several worn parts at once, and replacing them together restores like-new movement. Compared with single-item fixes like the Polaris PVA20 head float, this is the choice when the cleaner is moving poorly rather than floating wrong. Being genuine Polaris parts, fit is precise and backed by a 90-day limited warranty. The drawback is model exclusivity — owners of the 280 or 380 get nothing from this kit.
Pros:- Bundles all common wear parts in one purchase
- Genuine Polaris parts built to factory specifications
- Restores drive, steering, and traction together rather than piecemeal
- 90-day limited manufacturer warranty
Cons:- Limited to Atlas, Atlas XT, and MAXX models
- More expensive than fixing a single worn component
Best for: Polaris Atlas, Atlas XT, or MAXX owners whose cleaner has slowed, stalled, or lost steering and needs a full refresh
Not ideal for: Owners of older Polaris pressure-side models like the 280 or 380 — none of these components fit
- Compatible Models:Polaris Atlas, Atlas XT, MAXX
- Included Components:2 drive shaft assemblies, engine assembly, direction control devices (V2, sides A and B), 2 tracks (V2), gear housing covers
- Part Type:Genuine Polaris tune-up kit
- Warranty:90-day limited manufacturer warranty
- Cleaner Type:Suction-side
Our verdict“The most efficient way to revive a struggling Polaris suction cleaner, provided your model is on the compatibility list.”
Polaris Vac-Sweep Head Float PVA20 (Fits 180, 280, 360, 380 Pool Cleaners)
When a Polaris 180, 280, 360, or 380 starts diving to the floor or riding too high, a waterlogged or cracked head float is almost always the culprit, and the PVA20 is the factory-original cure. It pushes and screws onto the float mast in minutes — simpler than nearly any other repair in this roundup, including the tire swaps on the Hayward tires. Because it is a genuine Polaris part rather than an aftermarket copy, fit on the mast is exact and the 40-pound load capacity matches the original specification. The tradeoff is that plastic floats degrade with chlorine and sun over seasons, so this is a recurring replacement, not a permanent fix. It addresses one symptom only, so a cleaner with drive problems needs the tune-up kit instead.
Pros:- Genuine factory original Polaris part
- Fits four popular Polaris models (180, 280, 360, 380)
- Installs in minutes by pushing and screwing onto the float mast
- Exact factory fit and float performance
Cons:- Plastic construction wears out with chemical and UV exposure
- Fixes only buoyancy, not drive or steering faults
Best for: Polaris 180, 280, 360, or 380 owners troubleshooting climbing or depth problems caused by a failed float
Not ideal for: Anyone whose cleaner has drive or steering issues — a new float will not fix movement problems
- Brand:Polaris
- Part Number:PVA20
- Model Compatibility:Polaris 180, 280, 360, 380
- Material:Plastic
- Color:Black
- Load Capacity:40 pounds
- Installation:Push and screw onto float mast
Our verdict“The fastest, most reliable fix for a Polaris cleaner with float-related climbing problems, and the genuine part is worth it here.”
Pentair Rebel Pool Cleaner Replacement Head (Head Only), 360486
This is the most substantial replacement in this batch: a genuine Pentair complete cleaner head rather than an individual wear part. The redesigned bearings run faster and last longer, while the Sure-Flow two-wheel turbine design reduces clogging and reaches corners that single-track cleaners miss. A standout trait is compatibility with variable-speed and two-speed pumps at lower speeds — many replacement heads demand full pump power, so this one suits energy-conscious setups. It also works across gunite, vinyl, fiberglass, and tile surfaces. Compared with the Hayward PBS20JSTHBX headbox, this is the pricier, more engineered option, but it is head-only: buyers still need their existing Rebel body, hoses, and plumbing. Skipping the full replacement cost of a new cleaner is the whole point here.
Pros:- Redesigned bearings for faster operation and longer life
- Sure-Flow turbine resists clogging from dirt and debris
- Two-wheel design reaches corners and tight spaces
- Runs efficiently on variable-speed and two-speed pumps at lower speeds
Cons:- Head only — no hoses, body, or full cleaner included
- Higher cost than individual wear parts elsewhere in this roundup
Best for: Pentair Rebel owners with a damaged or worn head who want to avoid buying an entirely new cleaner
Not ideal for: Owners of other cleaner brands, or anyone expecting a complete unit — hoses and body are not included
- Brand:Pentair
- Part Number:360486
- Product Type:Replacement cleaner head only
- Design:Two-wheel with Sure-Flow turbine
- Pump Compatibility:Variable-speed and two-speed pumps
- Pool Compatibility:Gunite, vinyl, fiberglass, tile
Our verdict“A worthwhile investment for Rebel owners who want near-new cleaning performance without replacing the whole system.”
The Pool Cleaner 2-Wheel Head Replacement Assembly for Hayward PBS20JSTHBX
Where the Pentair Rebel 360486 head is the premium route, this headbox assembly for The Pool Cleaner series is the practical mid-range alternative for Hayward suction cleaners. It is a direct replacement for part PBS20JSTHBX, and the two-wheel configuration improves balance and turning on slopes and in corners. The housing is chemical-resistant and UV-stabilized, which matters for parts that live submerged in chlorinated water year-round. Installation needs no special tools, making it approachable for owners who have never opened up their cleaner. Like the Pentair option, it is head-only — you keep your existing hoses and suction line. The limitation is compatibility: it fits only 2-wheel Pool Cleaner models, so 4-wheel owners must look elsewhere in this roundup.
Pros:- Direct drop-in replacement for PBS20JSTHBX with no special tools
- Chemical-resistant, UV-stabilized housing for long-term durability
- Two-wheel design improves balance and turning precision
- Suitable for both residential and commercial pools
Cons:- Head only — does not include the full cleaner unit or hoses
- Compatibility limited to 2-wheel Pool Cleaner models
Best for: Owners of 2-wheel Hayward Pool Cleaner suction models whose head is cracked, worn, or losing maneuverability
Not ideal for: Owners of 4-wheel Pool Cleaner models or other brands — this assembly fits only the 2-wheel configuration
- Part Number Replaced:PBS20JSTHBX
- Cleaner Type:Suction-side automatic pool cleaner
- Wheel Configuration:2-wheel
- Material:Chemical-resistant, UV-stabilized plastic
- Dimensions:8″L x 8″W x 11″H
- Load Capacity:2.5 lbs
- Installation:Tool-free, suction side
Our verdict“A cost-effective way to give a worn 2-wheel Pool Cleaner a fresh head, as long as you confirm the two-wheel fit before ordering.”
PGFUN 2-Pack All-Purpose Filter Bags for Polaris 360 and 380 Pool Cleaners
Buying replacement bags in pairs makes practical sense because filter bags are the most frequently replaced part on any pressure-side cleaner — a single bag can tear mid-season, and having a spare avoids downtime. This two-pack covers the Polaris 360 and 380, and the all-purpose mesh is sized for leaves, twigs, and general debris rather than fine silt. Compared with the Nylon Mesh Pool Cleaner Bag for Polaris 280 and 480, the mesh here sits on the coarser side of all-purpose, so leaf-heavy pools in autumn are where this pick makes the most sense. The zipper closure empties faster than Velcro-style flaps, but debris needs to be shaken loose first or the zipper can jam — a real annoyance when the bag is full and wet.
Pros:- Two bags included so a spare is always ready
- Zipper closure empties faster than flap-style bags
- Reinforced clips make swapping the bag straightforward
- Mesh catches leaves and small twigs effectively
Cons:- Not compatible with Polaris 280 or 480
- Zipper can jam if debris is not shaken loose before opening
- All-purpose mesh lets fine silt pass through
Best for: Owners of Polaris 360 or 380 cleaners in leaf-heavy yards who want a spare bag on the shelf
Not ideal for: Anyone with a Polaris 280 or 480 — the clips and mounting will not match those models at all
- Quantity:2 bags
- Material:Nylon mesh
- Compatibility:Polaris 360 and 380
- Replaces Part Numbers:9-100-1014, 9-100-1021
- Incompatible Models:Polaris 280 and 480
- Closure:Zipper
- Item Weight:4.8 ounces
- Manufacturer:PGFUN
Our verdict“A sensible two-bag purchase for Polaris 360 and 380 owners who go through bags quickly during leaf season.”
ATIE Finned Seal Disc Skirt Replacement for Zodiac Baracuda G2, G3, G4 Pool Cleaners
A cracked or worn finned disc is one of the most common reasons a suction-side cleaner loses climbing ability and random movement, and this replacement restores both without the cost of a full rebuild. The standouts are the eight cross-compatible part numbers it replaces and the full range of surface compatibility — plaster, pebble, vinyl, and fiberglass — which matters because a disc formulated for rough plaster can scuff vinyl liners. Compared with the ATIE Long Life Diaphragm W69698, which handles the pulsing mechanism inside the same cleaners, this disc addresses the exterior seal that governs suction contact with the floor. The tradeoff is that it is an aftermarket part rather than genuine Zodiac OEM, so fit tolerances can vary slightly from factory spec on older units.
Pros:- Replaces eight different Zodiac part numbers
- Safe on vinyl, fiberglass, plaster, tile, marcite, and pebble finishes
- Restores suction contact and wall-climbing performance
- Includes a 1-year warranty
Cons:- Aftermarket part, not genuine Zodiac OEM
- No replacement hardware included beyond the disc itself
Best for: Zodiac Baracuda G2, G3, or G4 owners whose cleaner has stopped climbing or hugging the pool floor
Not ideal for: Owners who insist on genuine Zodiac OEM parts for warranty or exact-fit peace of mind
- Compatible Models:Zodiac Baracuda G2, G3, G4
- Replaces Part Numbers:W70464, W70329, W46666, W83277, W47521, W49655, W49610, W70032
- Color:Blue
- Item Weight:0.39 kg
- Installation Type:Suction side
- Pool Finishes:Plaster, tile, marcite, pebble, vinyl, fiberglass
- Warranty:1 year
Our verdict“The most practical way to bring a sluggish Baracuda G-series back to full cleaning performance without OEM pricing.”
Ulticor Ultra-Fine Filter Basket for Dolphin Robotic Pool Cleaners
Robotic cleaner owners face a different filtration problem than pressure-side users: standard baskets catch leaves but pass pollen, algae, and fine sand straight back into the water. This ultra-fine microfiltration basket solves that, fitting a long list of Dolphin models from the budget Nautilus CC up through the S-series and Escape lines. Compared with the PGFUN filter bags for Polaris cleaners, this basket targets the opposite end of the debris spectrum — where those bags excel at leaves, this one is built for water clarity. Two real caveats: owners of the Nautilus CC Pro and CC Supreme must look elsewhere, and older Active 10 and S50 units need a plastic piece trimmed out for a proper seat. Rinsing every 4-6 weeks keeps the fine mesh from clogging and starving suction.
Pros:- Ultra-fine microfiltration captures debris standard baskets pass through
- Fits a wide range of Dolphin and Prowler robotic models
- Support videos available for fitment questions
- Drop-in installation with no tools
Cons:- Not compatible with Nautilus CC Pro and Nautilus CC Supreme
- Older Active 10 and S50 models require removing a plastic piece to fit
- Fine mesh needs rinsing every 4-6 weeks to maintain flow
Best for: Dolphin robotic cleaner owners battling pollen, algae, or fine sand that standard baskets miss
Not ideal for: Nautilus CC Pro or CC Supreme owners — the basket is not compatible with those models
- Compatibility:Dolphin S50, S100, Active 10/15, Echo, T15, T25, Proteus DX3, Saturn, Cayman, Escape, Nautilus CC, and more
- Not Compatible With:Nautilus CC Pro, Nautilus CC Supreme
- Filtration Type:Ultra-fine microfiltration
- Maintenance:Rinse and clean every 4-6 weeks
- Product Type:Aftermarket filter basket
- Installation:Drop-in basket, no tools
Our verdict“A worthwhile clarity upgrade for compatible Dolphin owners, provided the fine mesh maintenance schedule fits your routine.”
R0714400 Cyclonic Scrubbing Brush Replacement (4-Pack) for Zodiac MX6 Elite, MX8 Elite and Polaris MAXX, Atlas, Atlas XT, Lynx Pool Cleaners
When the spinning brushes on an Elite-series cleaner wear down, the machine still glides around the pool — it just stops actually scrubbing, which defeats the point of paying for the Elite version. This four-pack restores that agitation, and having all four brushes in one kit matters because they wear at roughly the same rate, so replacing only one creates uneven contact. Compared with the Blue Hump Front Tire replacements for Hayward cleaners, which address traction and steering, these brushes attack the cleaning result itself — dirt, sand, and stuck-on film on tile and hard surfaces. Installation is genuinely tool-free and takes minutes. The honest tradeoff: like OEM brushes, heavy daily use will still wear them out, and the compatibility list is narrow enough that cross-checking the model name before buying is non-negotiable.
Pros:- Full set of four brushes for even, balanced scrubbing
- Tool-free installation in under 5 minutes
- Upgraded plastic and rubber construction for longer life
- One-year warranty included
Cons:- Only fits specific Zodiac MX6/MX8 Elite and Polaris MAXX, Atlas, Atlas XT, and Lynx models
- Wears out under heavy use at a rate similar to OEM brushes
Best for: MX6/MX8 Elite or Polaris MAXX/Atlas owners whose cleaner has stopped removing stuck-on debris
Not ideal for: Owners of other Zodiac or Polaris models — the R0714400 mount fits only the listed cleaners
- Quantity:4 brushes
- Part Number:R0714400
- Compatible Models:Zodiac MX6 Elite, MX8 Elite; Polaris MAXX, Atlas, Atlas XT, Lynx
- Material:Premium plastic and rubber
- Surface Recommendation:Metal, plastic, tile
- Installation:Tool-free, under 5 minutes
- Brand:Jolaxy
- Warranty:1 year
Our verdict“The right four-pack for Elite-series owners who want their scrubbing function back at full strength in one purchase.”
Nylon Mesh Pool Cleaner Bag for Polaris 280 and 480
Plenty of Polaris 280 and 480 units are still running after decades, and bag availability for them is what keeps these workhorses alive. This replacement covers both models with reinforced stitching and an enhanced clip — two upgrades that address the most common failure points, since the clip is what detaches under a full load and torn seams are what dump debris back into the pool. Where the PGFUN two-pack serves the newer 360 and 380, this bag is the counterpart for the older generation, so model identification comes before anything else here. The wide zipper opening makes emptying less of a chore than narrow-mouth bags, though the compatibility ceiling is strict: buyers with a 360, 380, or any robotic cleaner get nothing from this purchase.
Pros:- Correct fit for the older Polaris 280 and 480 generations
- Reinforced stitching resists tearing under heavy leaf loads
- Enhanced clip holds tighter than worn original clips
- Wide zipper opening simplifies emptying
Cons:- Compatibility limited strictly to Polaris 280 and 480
- Sold as a single bag rather than a multi-pack
Best for: Long-time Polaris 280 or 480 owners keeping an older pressure-side cleaner in service
Not ideal for: Anyone with a Polaris 360, 380, or robotic cleaner — the bag fits only the two listed models
- Compatible Models:Polaris 280 and 480
- Bag Types:K13, K16
- Material:Nylon mesh
- Color:White
- Installation Type:Pressure side
- Dimensions:13.3 x 9 x 2.7 inches
- Weight:0.17 kg
- Features:Wide zipper opening, reinforced stitching, enhanced clip
Our verdict“A dependable single-bag replacement that keeps legacy Polaris 280 and 480 cleaners working without an upgrade.”
ATIE Long Life Diaphragm W69698 with Retaining Ring W81600 Replacement for Zodiac G3, G3 PRO, and G4 Pool Cleaners (2 Pack)
The two-diaphragm bundle suits owners of several compatible Zodiac cleaners or anyone who wants a spare ready for the next repair. It fits the G3, G3 PRO, G4, Alpha 2, Alpha 3, and Zoom, and each diaphragm comes with a W81600 retaining ring. That included ring makes this a more complete diaphragm replacement than buying the main part alone. Compared with the ATIE finned seal disc elsewhere in this roundup, this kit addresses a different wear point inside the cleaner rather than the disc that maintains contact with the pool surface. The tradeoff is that it is an aftermarket part, not an original Zodiac component, and the listing provides no material or lifespan details to weigh against OEM alternatives. Check the cleaner model and part number before ordering.
Pros:- Fits six listed Zodiac cleaner models.
- Includes a W81600 retaining ring with each diaphragm.
- Two diaphragms provide a spare for a later replacement.
Cons:- Aftermarket part rather than an original Zodiac component.
- Material and expected service life are not specified.
Best for: Owners of a Zodiac G3, G3 PRO, G4, Alpha 2, Alpha 3, or Zoom who want a diaphragm and retaining ring for a repair plus a spare.
Not ideal for: Owners of models outside the listed compatibility range or buyers who require an original Zodiac part.
- Diaphragm model:W69698
- Retaining ring model:W81600
- Quantity:2 diaphragms
- Compatible models:Zodiac G3, G3 PRO, G4, Alpha 2, Alpha 3, and Zoom
- Ring included:One retaining ring per diaphragm
- Brand status:Aftermarket replacement
Our verdict“Choose this kit if your listed Zodiac cleaner needs a diaphragm and you want a matching retaining ring plus a spare.”
Funmit C10 Pool Cleaner Tire Replacements, 3-Pack
For a Polaris cleaner losing grip, these three C10 tires let owners replace the full set in one go. The listed fit covers Polaris 180, 280, 360, and 380 models along with several Vac-Sweep variants, including the 3900 Sport. Their heavy-duty rubber is specified for plaster, concrete, vinyl, PebbleTec, and Marcite, giving buyers a broad surface range to match against their pool. Unlike the ATIE D20 swivel and D15 nut kit, which repairs feed-hose connections on select Polaris models, this set is aimed at traction and movement. The replacement is described as tool-free and taking under 10 minutes for all three tires, though that estimate may depend on the cleaner and the old tires’ condition. The main drawback is the need to verify the exact model and tire type before ordering.
Pros:- Three tires allow a complete set replacement.
- Listed for a broad range of Polaris and Vac-Sweep models.
- Rubber is specified for several common pool surfaces.
- Tool-free installation is described as taking under 10 minutes for all tires.
Cons:- Model and tire-type compatibility require careful checking.
- The listing does not specify tire dimensions or expected service life.
Best for: Polaris 180, 280, 360, or 380 owners who need to replace all three tires and want a tool-free repair.
Not ideal for: Owners whose cleaner model or required tire type does not match the listing, or buyers seeking a repair for hose connections.
- Quantity:3 tires
- Replacement part numbers:C10, C-10 (G4)
- Compatible models:Polaris 180, 280, 360, 380; Vac-Sweep 280, 360, 380; 280 TankTrax; TR28P; 280 Black Max; 360 Black Max; TR36P; 380 Black Max; TR35P; 3900 Sport
- Material:Heavy-duty rubber
- Compatible pool surfaces:Plaster, concrete, vinyl, PebbleTec, and Marcite
- Installation:Tool-free; listed as under 10 minutes for all three tires
Our verdict“Pick this set when a compatible Polaris cleaner needs fresh traction across all three wheels.”
ATIE Pool Cleaner Hose Swivel D20 and Hose Nut D15 Combo Kit for Polaris 280, 380, and 180 (2 Pack)
This kit targets a small but specific repair: connecting feed hoses on a Polaris 180, 280, or 380. Two D20 swivels and four D15 nuts give the buyer matching pieces for more than one connection, while the swivel is meant to let the hose turn without twisting up. That makes it a different kind of fix from the Funmit C10 tire set, which addresses traction rather than hose movement or connection hardware. Its narrow fit list is the key limitation: the listing explicitly excludes the Polaris 360, so buyers should confirm their model before choosing it. The parts are plastic, and the kit provides no durability or replacement interval information. If your cleaner is compatible and its feed-hose fittings are the problem, the grouped hardware keeps those small parts together.
Pros:- Includes two D20 swivels and four D15 hose nuts.
- Fits the listed Polaris 180, 280, and 380 models.
- Combines the related feed-hose connection pieces in one kit.
Cons:- Not compatible with the Polaris 360.
- Plastic construction has no stated durability or service-life details.
Best for: Polaris 180, 280, or 380 owners repairing feed-hose connections who need both swivels and hose nuts.
Not ideal for: Polaris 360 owners or buyers replacing tires, scrubbers, or other cleaner components.
- Compatible models:Polaris 180, 280, and 380
- Excluded model:Polaris 360
- Package contents:2 D20 hose swivels and 4 D15 hose nuts
- Material:Plastic
- Color:White
- Item weight:0.05 kg
- Outside diameter:20 mm
Our verdict“Choose this kit for feed-hose fitting repairs on a listed Polaris model, after ruling out the 360.”
12 Pack Sweep Hose Tail Scrubbers for Polaris Pool Cleaners
These 12 polyurethane foam scrubbers make sense for Polaris owners who replace the sweep-hose tail pieces regularly or want spares ready for several maintenance rounds. They fit a broader range of listed cleaners than the ATIE D20/D15 hose kit, including the 180, 280, 360, 380, 480, and 3900 Sport, and match the stated 91003105 part-number family. The scrubber sits at the end of the sweep hose, where it can help limit hose wear while supporting cleaning action. Installation is described as tool-free, but the vacuum-compressed packaging means the foam needs time and instructions to expand before use. This is a replacement for the tail scrubbers, not a fix for a damaged hose or a worn cleaner tire. It is also a third-party part rather than Polaris-branded hardware.
Pros:- Twelve scrubbers provide spares for future maintenance.
- Fits several listed Polaris Vac-Sweep models.
- Tool-free replacement is described.
- Polyurethane foam is intended to help reduce sweep-hose wear.
Cons:- Compressed foam needs time and instructions to expand before use.
- Third-party replacement rather than an original Polaris part.
- Does not repair damage to the sweep hose itself.
Best for: Polaris owners with compatible models who want a supply of tail scrubbers for repeated replacements or multiple cleaners.
Not ideal for: Buyers needing just one scrubber, an immediate out-of-package replacement, or a repair for a damaged sweep hose.
- Material:Polyurethane foam
- Quantity:12 scrubbers
- Compatible models:Polaris 180, 280, 360, 380, 480, and 3900 Sport
- Compatible part numbers:Polaris 91003105, 9-100-3105, PP-91003105
- Packaging:Vacuum compression
- Installation:Tool-free replacement at the sweep-hose end
- Use:Helps protect the sweep hose from wear
Our verdict“This bulk pack fits compatible Polaris owners who want replacement tail scrubbers on hand and can wait for the foam to expand.”
GW9012 Pool Cleaner Swivel Kit Assembly
When a listed GW cleaner’s swivel is worn, this single GW9012 assembly offers a focused replacement rather than a bundle of unrelated maintenance parts. Its fit is limited to the 9000 and GW8000 above-ground cleaners and the GW9500 in-ground model, so it is less broadly interchangeable than the Polaris scrubber pack elsewhere in this group. The stated corrosion-resistant plastic suits pool equipment exposed to water, but the listing does not give dimensions or further material details to help identify a match. With only one assembly included, this is a targeted repair purchase rather than a supply of spares. Check the cleaner model and part number before ordering; the short 30-day after-sales guarantee is also a narrower assurance than buyers may expect for a replacement component.
Pros:- Designed to replace a worn swivel assembly.
- Plastic is specified as corrosion resistant.
- Fits listed above-ground and in-ground GW cleaner models.
Cons:- Compatibility is limited to the listed models.
- Package includes only one assembly.
- The stated after-sales guarantee lasts 30 days.
Best for: Owners of a 9000, GW8000, or GW9500 cleaner who have confirmed the GW9012 is the matching swivel assembly.
Not ideal for: Owners of other cleaner models or buyers who want multiple spare assemblies in one package.
- Part number:GW9012
- Package contents:1 swivel assembly
- Compatible models:9000 and GW8000 Above Ground Pool Cleaner; GW9500 In-Ground Pool Cleaner
- Material:Plastic
- Material feature:Corrosion resistant
- Warranty:30-day after-sales guarantee
Our verdict“Choose the GW9012 for a confirmed swivel repair on one of its three listed cleaner models.”
How We Picked
I evaluated every part against four criteria, weighted in this order: fit accuracy, material durability, installation ease, and value relative to buying OEM individually. Fit came first because a replacement part that doesn’t seat correctly can cause more problems than the worn component it replaces — leaking seals, jammed drives, and reduced suction all trace back to mismatched tolerances. I prioritized parts with explicit model compatibility lists and consistent dimensional accuracy, and flagged any that required modification to install.
Durability came second, judged on material grade: genuine rubber and PVA compounds versus brittle aftermarket blends, reinforced versus single-stitched filter bags, and UV resistance for parts exposed at the waterline. Value was calculated per use, not per price — a 12-pack of scrubbers that lasts three seasons beats a cheaper 6-pack replaced twice as often. This ranking logic explains why the tune-up kit leads the list: it scores highly on all four criteria at once, while single-component parts rank based on how well they solve one specific, high-frequency failure.
| replacement parts for automatic pool cleaner | Material |
|---|---|
| 896584000-143 Blue Hump Front | Heavy-duty rubber |
| Polaris Suction Cleaner Tune-U | — |
| Polaris Vac-Sweep Head Float P | Plastic |
| Pentair Rebel Pool Cleaner Rep | — |
| The Pool Cleaner 2-Wheel Head | Chemical-resistant, UV-stabilized plastic |
| PGFUN 2-Pack All-Purpose Filte | Nylon mesh |
| ATIE Finned Seal Disc Skirt Re | — |
| Ulticor Ultra-Fine Filter Bask | — |
| R0714400 Cyclonic Scrubbing Br | Premium plastic and rubber |
| Nylon Mesh Pool Cleaner Bag fo | Nylon mesh |
| ATIE Long Life Diaphragm W6969 | — |
| Funmit C10 Pool Cleaner Tire R | Heavy-duty rubber |
| ATIE Pool Cleaner Hose Swivel | Plastic |
| 12 Pack Sweep Hose Tail Scrubb | Polyurethane foam |
| GW9012 Pool Cleaner Swivel Kit | Plastic |
Factors to Consider When Choosing Replacement Parts For Automatic Pool Cleaners
Before ordering any replacement part, a few bigger-picture decisions will save you money and frustration. These are the factors I weighed when ranking the lineup — and the mistakes that trip up most buyers.Match the Model Number, Not the Brand
The most common mistake in this category is assuming brand compatibility means model compatibility. A Polaris 280 part rarely fits a 360, and Zodiac G2 parts differ from G4 parts in subtle but decisive ways. Before ordering, locate the full model number on your cleaner’s body or serial sticker and cross-reference it against the part’s compatibility list — not just the title. Sellers frequently list a popular model in the headline while burying the full fit chart in the description. If your cleaner is more than a decade old, also check for revision letters (a 280 built before 2010 uses different tail scrubbers than newer units). Fifteen minutes of verification beats a return cycle that leaves your pool uncleaned for two weeks.
OEM Versus Aftermarket: When the Savings Are Real
The price gap between genuine and aftermarket parts can be substantial, but it doesn’t apply evenly across component types. For soft wear parts — tires, scrubbers, tail sweep wear rings — quality aftermarket versions typically perform close to OEM and multi-packs push the per-unit cost down dramatically. For precision mechanical parts — diaphragms, swivel assemblies, tune-up internals — tolerances matter more, and a slightly stiff diaphragm or leaking swivel directly reduces cleaning performance. My general rule: save money on wear surfaces, spend carefully on moving and sealing components. Also check warranty implications — some manufacturers void coverage if non-genuine internal parts cause a failure, which matters most on newer cleaners still under warranty.
Replace Wear Parts in Sets, Not One at a Time
Wear components on automatic cleaners fail on roughly the same timeline because they accumulate the same hours. Replacing one tire while the others are 80% worn creates uneven drive traction, causing the cleaner to pull to one side or stall on walls — the symptom many owners misdiagnose as a motor problem. The same logic applies to scrubber sets, hose seals, and filter bag rotations. This is why tune-up kits and multi-packs dominate the top of my ranking: they align the wear cycle instead of chasing individual failures. A useful habit is to date-stamp parts with a marker when you install them so you can anticipate the next replacement window instead of reacting to a breakdown.
Filter Bags and Baskets: Match Mesh to Your Debris
Filter media is where buyers most often buy the wrong product for their situation. Standard mesh bags handle leaves and large insects but pass pollen, algae fragments, and fine silt straight back into the water — which is why some pools stay cloudy despite a running cleaner. Ultra-fine baskets and fine-mesh bags capture that debris but clog faster and reduce flow, so they need rinsing more often. If your pool sits near trees, a two-stage approach works best: a standard bag for heavy season and a fine basket for spring pollen weeks. Don’t default to the finest mesh available; over-filtering a heavy-debris pool means daily cleaning instead of weekly.
Diagnose Before You Buy
Many parts get replaced that weren’t the problem. A cleaner that stops moving is often diagnosed as a broken diaphragm when the real cause is a clogged hose, a worn hose swivel leaking suction, or a filter bag so full the unit can’t generate drive pressure. Before ordering, run a simple sequence: check the filter bag first, inspect hose connections for air leaks second, then examine the diaphragm or drive components. Parts like the ATIE diaphragm and swivel combo kits exist precisely because those two failures mimic each other. Buying a diagnostic multi-part kit costs less than two rounds of trial-and-error ordering, and leftover components aren’t wasted — they’re the next scheduled wear item.
Material Quality and Sun Exposure
Pool cleaner parts live in a harsh environment: chlorinated water, UV exposure, and constant abrasion. Cheaper aftermarket parts often use lower-grade rubber blends that硬化 crack within a season of sun exposure, while genuine or premium aftermarket parts use UV-stabilized compounds lasting several years. This matters most for floats, skirts, and seals that sit partially exposed at the surface. Filter bags face a separate issue — single-stitched seams fail at the corners under a heavy leaf load, so reinforced stitching is worth paying for if your pool collects substantial debris. Flex any rubber part gently before installing: if it feels stiff or shows micro-cracks out of the package, return it rather than installing a part that’s already aging out.
Frequently Asked Questions
How do I know which replacement part my automatic pool cleaner actually needs?
Start by identifying the symptom, not the part. A cleaner that stops moving usually points to the diaphragm, tires, or drive tracks; one that moves but leaves debris behind points to the filter bag, suction leaks at hose swivels, or a worn seal disc. Check the filter bag and hose connections first, since clogs and air leaks mimic mechanical failures and cost nothing to fix. Once you’ve isolated the component, match your cleaner’s full model number — including revision — against the part’s compatibility chart before ordering. Many sellers offer diagnostic tune-up kits that include several likely culprits, which is often cheaper than ordering one part, waiting, and ordering another.
Are aftermarket pool cleaner parts as good as OEM?
It depends on the component type. Aftermarket wear parts — tires, scrubbers, tail sweep wear rings — frequently match OEM performance at a lower per-unit cost, especially in multi-packs, and these are where the savings are genuinely worth taking. Precision components like diaphragms, swivel assemblies, and internal tune-up parts have tighter tolerances, and a slightly off-spec aftermarket diaphragm can reduce suction enough to leave your pool dirty. Read the compatibility detail carefully: quality aftermarket brands list exact model fits and material specs, while vague listings like ‘fits most Zodiac cleaners’ are a warning sign. If your cleaner is still under manufacturer warranty, confirm whether aftermarket internals affect coverage before installing them.
How often should I replace the wearable parts on my pool cleaner?
Most wear components follow the pool season rather than the calendar: tires and scrubbers typically need replacement every one to two seasons, diaphragms every one to three seasons depending on debris load, and filter bags should be replaced when seams show wear or mesh stays clogged after rinsing. Heavy debris pools — those near trees or in windy areas — can double that wear rate. Rather than waiting for failure, inspect parts at season opening: flex rubber components for cracks, check tire tread depth, and hold filter bags up to light to spot thinning mesh. Replacing matched sets at the same time prevents uneven performance, which is why I favor multi-packs and tune-up kits over single-unit purchases.
Why does my cleaner still leave fine debris and cloudy water behind after running?
This is almost always a filtration mismatch rather than a mechanical fault. Standard mesh filter bags and baskets are designed for leaves and large debris, and they pass pollen, algae fragments, and fine silt straight back into the pool. The fix is an ultra-fine filter basket or fine-mesh bag, like the Ulticor option for Dolphin robots — but understand the tradeoff: finer media clogs faster and restricts flow, so it needs rinsing more frequently. If the problem appears suddenly rather than gradually, first check whether your existing bag has a seam tear or the cleaner’s suction has dropped from a clogged hose. Use fine filtration as a seasonal tool during pollen weeks rather than year-round if your debris load is normally heavy and coarse.
Is a full tune-up kit worth it versus replacing parts as they break?
For cleaners more than two seasons old, a tune-up kit is almost always the better purchase. The components inside — typically seals, gaskets, wear rings, and small drive parts — degrade on similar timelines, so if one has failed, the others are usually close behind. Replacing them individually means paying shipping multiple times and enduring repeated downtime, while a kit restores the cleaner to near-new performance in one session. Kits also protect against misdiagnosis: if you guessed wrong about which part failed, the correct one is already in the box. The exception is a newer cleaner with a single obvious failure, where one targeted replacement makes more sense than installing parts you won’t need for years.
Conclusion
The right pick depends entirely on your cleaner and your failure mode. For best overall, the Polaris Suction Cleaner Tune-Up Kit (R0997900) restores full performance in one purchase and suits any Polaris suction cleaner past the two-season mark. For best value, the Blue Hump Front Tire 2-Pack and Funmit 3-Pack tires solve the most frequent failure in this category at the lowest per-unit cost. For best premium, the Ulticor Ultra-Fine Filter Basket justifies its price for Dolphin owners battling pollen and fine silt that standard baskets pass through. For beginners who aren’t sure what’s wrong, the ATIE Diaphragm and Swivel Combo Kits cover the two failures that mimic each other, removing the guesswork from a first repair. And for specific needs: the Pentair Rebel Replacement Head for owners of that model whose unit has cracked, the 12-pack of tail scrubbers for stocking up on the cheapest consumable in pool care, and the R0714400 Cyclonic Brush 4-Pack for scrubbing-model owners needing aggressive wall cleaning restored. Match the part to your model number first, your symptom second, and this list will narrow to one obvious choice.
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
